Large Seawater Reverse Osmosis Plant

Large Desalination System

Check our complete Large SWRO package here

  • High rejections membranes
  • Energy recovery by turbine or pressure exchanger to maximize cost savings
  • All equipment mounted on stainless steel 304 skid
  • Standard control with RO micro-controller and conductivity display
  • Advanced control with flow, pressure, pH and conductivity transmitters for   data monitoring, normalisation and SCADA

The system includes:

* Antiscalant dosing station
* 5 microns filter
* High pressure pump
* Energy recovery turbine or Pressure exchanger
* SW membranes 8 " membranes
* Fiber glass pressure vessels
* Standard or advanced instrumentation
Type SWRO-L 5 10 20 30 50 70 100
Permeate flow * l/h 5 10 20 30 50 70 100
Feed flow l/h (45% Recovery) *
11 22 44 67 111 156 222
Salt Rejection at 25° C ~ 95%
Connections Feed 2" 3" 4" 5" 61/2" 7 1/2" 10"
Permeate 1 1/2" 2" 3" 3 1/2" 4 1/2" 5" 6"
Concentrate 1 1/2" 2" 3" 4" 5" 6" 7"
Power HPP with energy recovery **
15 - 20kW 30 - 40kW 50 - 70kW 95 - 110kW 150 - 200kW 200 - 250kW 280 - 360kW
Dimensions mm
Length 4000 4000 6000 7000 8000 8000 8000
Width 1000 1000 1200 1500 1500 2000 2000
Height 1600 1600 1600 1800 1800 1800 1800
Rinse tank volume (L) 300 550 1000 1500 2500 3500 5200

* under standard conditions: TDS 35.000 ppm, temperature = 25° C, pH = 8
** Also available in 50Hz or 60Hz

SWRO plants with 2 passes are also available byadding a BWRO plant in serie to further purify SWRO permeate and maximise Boron removal in warm and very salty waters.

These data are given for information purpose only. They are subject to modofications depending on the water quality.

Seawater RO units always required a pre-treatment, that 's why Lenntech offers large SWRO packages including pre-treatment and post-treatment.

For more information or quotation, please contact us: Feedback Form or call us on +31 152 610 900